LPG Tank Installation and LPG filling points.

There are two main options on autogas automotive tanks available- cylindrical or toroidal (ring) the later would fit in place of the vehicle spare wheel.
With some vehicles it is possible to remove the original manufacturers petrol tank and to install a smaller, fabricated petrol tank with a suitable cylinder under chassis.

Stako cylinder tank shown with vale protection box

Example of cylinder tank boot mounted showing the tank secured to a chassis mounted tank frame with straps. In this picture there is also a convoluted vent hose shown to connect the tank valve box atmosphere for venting.

Ring tank as used in place of the sapre wheel. These are available in many sizes to suit underfloor or simple replacment spare wheel mounting. Again using the same valve box as the cylinder tank to allow venting.

Example of ring tank in place of spare wheel with Autogas 2000 Ltd constructed false floor

Autogas 2000 petrol tank conversion This picture illustrates a new smaller petrol tank fitted to a Landrover Discovery with two 40ltr LPG tanks under chassis. This enables the rear seats to be retained. Picture shows installation prior to completion and rust proofing treatment.

Autogas 2000 LPG underfloor tank All underfloor tank are painting with a stone gaurd protection paint specially applied while the conversion is been undertaken.

External LPG fillpoints.

Filling point is located on the outside of the vehicle usually through a panel or skirt side. The filler is a UK connection and with our conversion can be adapted with simple screw in adapters to fill in other countries while touring. Colour coded fillers can be organised but these we will require a paint code for and will have to be painted to match the car at additional cost

Sample of a Range Rover filler through the vehicle panel side during filling.

Colour coded Autogas 2000 filler fitted

Selection of brass filling adapters used for continental touring